Top 10 Rain Barrel Spigot Kit – Outdoor Faucets

As an Amazon Associate I earn from qualifying purchases.

1. RAINPAL

#ad

RAINPAL RBS005 Brass Water Container/Rain Barrel Quarter Turn SpigotLead Free Compliant

#ad
RAINPAL #ad - U. S. Solid brass quarter turn ball Valve Spigot, Garden Hose Hookup, with Aluminum Alloy Handle. Thread tape NOT required. Customer service, and pipe wrench or adjustable wrench w/ 1 inch capacity.

Tools needed for installation: electric drill, u. S. Contains less than 025% lead, lead free compliant, For more information about “Lead Free Compliant", please visit epa. Gov. Design, U. S. Standard, 7/8 inch hole saw, LIFE TIME Warranty against leak, break or crack. You need to have the access to the inside of container to install the nut. Lift time warranty against leak, break or crack. Universal design for any open lid barrels or containers, fit up to 1/4 inch wall, Need 21 mm or 7/8 inch diameter hole to install.
BrandRAINPAL #ad
ManufacturerOLDEGG Innovations, LLC #ad
Height1.8 Inches
Length3 Inches
Weight8 ounces
Width1.3 Inches
Part NumberRBS005
WarrantyLife Time Warranty against Leak, Break or Crack

2. RAINPAL

#ad

RAINPAL RBS022 Lead Free Compliant Brass Rain Barrel Spigot3/4" Quarter Turn Ball Valve w/ Bulkhead Fitting and Thread Tape

#ad
RAINPAL #ad - Bulkhead fitting need 1-1/4 inch diameter hole to install. Large 10mm flow opening, Tested with 2 ft Water. For more info about lead free compliant, please visit epa.

Gov. Heavy duty 4. 0 oz solid brass bulkhead fitting, female 3/4" npt threaded on both ends, install spigot on either end. 15 second/gallon or 4gPM, these barrels usually have wall thickness of 01-02 inch. Contain less than 025% lead, lead Free Compliant. Fit up to 1/2 inch thickness wallworks great for 55 gallon used plastic drum barrels on craigslist, Great Flow Rate at Approx. Heavy Duty 6. 0 oz 3/4" no kink quarter turn solid Brass Ball Valve with Garden Hose Hook Up. Attention: reverse threaded fitting nut, turn clockwiSE to LOOSEN.
BrandRAINPAL #ad
ManufacturerRAINPAL #ad
Height2 Inches
Length4 Inches
Weight0.59 Pounds
Width1.75 Inches
Part NumberFBA_RBS022
ModelFBA_RBS022
WarrantyLife Time Warranty against Leak, Break or Crack

3. EarthMinded

#ad

Turn Any Barrel or Trashcan Into a Rain Barrel, INSTRUCTIONS INCLUDED, Installs From Outside of Drum or Barrel, Rain Barrel Spigot: Fits Standard Garden Hose

#ad
EarthMinded #ad - Save water and money - collect and conserve chemical-free rain water, reduce your water bill and use environmentally friendly methods to water your plants and complete your outdoor chores.

Added convenience - garden hose connection is located on the outlet which allows a straight water path reduces turbulence and increases flow rate. On/off turn valve - easily twist the turn valve to release or stop as much water as desired. Easy to install - spigot fits 1 1/4" hole & includes plastic seal; use the rain barrel spigot to replace missing or old spigots. Fill faster - the rain barrel spigot allows you to fill watering cans & pots faster with less waiting.
BrandEarthMinded #ad
ManufacturerEarthMinded #ad
Height3.25 Inches
Length4.5 Inches
Weight0.13 Pounds
Width3.75 Inches
Part NumberF-RN023
Model410

4. Hourleey

#ad

Hourleey Brass Rain Barrel Quarter, Rain Barrel Quarter Turn Ball Valve Spigot with Bulkhead Fitting, Rain Barrel Spigot Kit 1/2 inch

#ad
Hourleey #ad - Applicable scenarios: bulkhead fittings need to be installed with 1-inch diameter holes, suitable for the case where the wall thickness does not exceed 1.

3 inches. High quality: heavy-duty solid brass bulkhead fitting, no kinks, with spigot installed at both ends. Tools required for installation: Electric drill, 1-1/8 inch hole saw, pipe wrench or adjustable wrench. Intimate help: for helping you easily install the rain barrel quarter and effectively prevent leakage, we provide a gasket. Heavy-duty 1-1/8 inches, screwed along the 1-1/8 inch internal thread all the way, right-angle rotating solid brass ball valve. Two installation methods: Front mounting and rear mounting of brass bulkhead fittings.
BrandHourleey #ad
ManufacturerHourleey #ad

5. Renator

#ad

And Polyester Wire, Thread Tape, 3/4" Quarter Turn Ball Valve w/Bulkhead Fitting, Renator P72-02440G Brass Spigot for Rain Barrel. Lead-Free Compliant

#ad
Renator #ad - The product also comes with a detailed, illustrated guide. Heavy-duty, this spigot is built for longevity. Simply drill a hole, and thread the attached wire down through the hole then slide the bulkhead fitting down the wire as a guide- works well for barrels with and without open top design.

This kit contains: 3/4" spigot with quarter turn valve, roll of teflon tape, wire, 3/4 inch bulkhead fitting with washer, adjustable or 1 inch wrench. A quality spigot designed for maximum water flow. Complete kit at a fair price. Required: drill, save yourself time and money by purchasing this full kit at once. Visit epa. Gov for more info. The attached washer and silicone tape provide a perfect waterproof seal, and self tighten- which ensures the spigot will not accidentally loosen from use, and the bulkhead fitting and spigot are reverse-threaded, and will hold a tight seal over multiple seasons.

The bulkhead fitting and spigot are reverse-threaded, and are tightened from the outside of the barrel- no need to fiddle inside with a wrench. The spigot also contains less than 025% lead, durable construcTION. The 3/4" spigot is threaded for easy use with a hose- no need to haul buckets or watering cans. Installation so quick, you'll barely have time to get your drill out.
BrandRenator #ad
ManufacturerRenator #ad

6. Renator

#ad

And Polyester Wire, Thread Tape, Renator P72-02330G Brass Spigot for Rain Barrel. Lead-Free Compliant, 3/4" Quarter Turn Ball Valve w/ Bulkhead Fitting

#ad
Renator #ad - The attached washer and silicone tape provide a perfect waterproof seal, and the bulkhead fitting and spigot are reverse-threaded, and self tighten- which ensures the spigot will not accidentally loosen from use, and will hold a tight seal over multiple seasons. Instead of purchasing separate washers and fittings, installation guide.

Installation so quick, you'll barely have time to get your drill out. The product also comes with a detailed, and are tightened from the outside of the barrel- no need to fiddle inside with a wrench. Complete kit at a fair price. Heavy-duty, this spigot is built for longevity. From using a brass ball valve and body and aluminum handle with orange paint spray, compliant with the EPA's Lead Free requirement. This spigot is designed to provide a strong water flow by relying on pressure from the water in your rain barrel.

Simply drill a hole, illustrated guide. Required: drill, 3/4 inch bulkhead fitting with washer, save yourself time and money by purchasing this full kit at once. The bulkhead fitting and spigot are reverse-threaded, and thread the attached wire down through the hole then slide the bulkhead fitting down the wire as a guide- works well for barrels with and without open top design. The 3/4" spigot is threaded for easy use with a hose- no need to haul buckets or watering cans. Make use of the water collected from your rain barrel easily.
BrandRenator #ad
ManufacturerRenator #ad

7. Broadsheet

#ad

Broadsheet Rain Barrel Kit, Bulkhead Fitting 3/4 inch Rain Barrel Diverter and Hose Adapter for Aquariums, PVC Rain Barrel Spigot Kit, Water Tanks, Tubs, Pools

#ad
Broadsheet #ad - 3/4 inch. Suitable for long-lasting, swimming pools, aquariums, irrigation, commercial plumbing, reef tank, water parks. Practical design: the bulkhead fitting adapter with 4 mm thick durable silicone seal gasket that will contour to the shape of the round barrel plumbing, the PVC spigot rain barre faucet kit is able to fast and easy to empty your rain barrel water into a watering can versus a slow garden hose.

Customer service-- we value your shopping experience and strive to offer a high-quality product and service. Easily installation: this spigot kit will easily convert your empty plastic barrels and water tank containers into a simple rain barrel. The rain barrel spigot kit is made of pvc material, break and peel, not easy to fade, durable PVC material and sturdy construction make it to serve you for long time are practical tools for daily life.

Easy and reliable to install with 3/4 inch garden hose fitting by rotating connector tighten, no additional tools required. Bulkhead can be installed with closed top barrel. What you receive:1 pieces the rain barrel spigot kit measures approx. Widely application: sturdy structure allows it to be applied for all seasons and different weather situations. If you have any problem about the item, please contact us in time and we will 24 hours online to service.
BrandBroadsheet #ad
ManufacturerWuchuan-us #ad

8. Da by

#ad

Da by Rain Barrel Spigot Faucet Kit PVC Bulkhead Fitting with Ball Valve and Garden Hose Adapter Barb 16mm5/8" OD and Stainless Steel Pipe Clamps and Thread Seal Tapekit for 16mm ID Hose

#ad
Da by #ad - Specifications: 3/4 inch ball valve, 5/8"16mm oD Barb Hose Adapterfor 16mm ID Hose, Perfect connect your Rain Barrel and Hose. High quality: pvc, good for all seasons. Full port, durable, unleaded, non-toxic, resists cracking and peeling, fast and easy to empty your rain barrel water into a watering.

Widely application: suitable for water bucket, swimming pools, irrigation, aquariums, reef tank, water parks. They are good tool that can be used in many places. Package: garden spigot kit includes pvc ball valve x 1 and pvc bulkhead fitting adapter x 1 and PVC threaded connector x 1 and garden hose adapter barb16mm5/8" OD x 1 with stainless steel pipe clamp x 2 and thread seal tape x 1. Easy to install: drill 1. 5inch 37mm hole to install bulkhead fitting adapter, 4 mm thick durable silicone seal gasket seal the water tight and long-lasting.
BrandDa by #ad
ManufacturerAooBaBa #ad

9. YIYUN

#ad

Aquariums, Tubs, YIYUN Rain Barrel Diverter Kit, Water Barrel Spigot 3/4 PVC Fittings Ball Valve with Hose Faucet Adapter for Water Tanks, Pools, Garden Barrels

#ad
YIYUN #ad - Package includes1 piece rain barrel with spigot Kits and bulkhead tank fitting hose adapter. Widely applicationcommercial plumbing, reef tank, swimming pools, aquariums, irrigation, water tanks, rain buckets, water parks, and OEM applications.

Easy to installnot peel, drill 1 3/8 inch hole to install bulkhead fitting adapter with durable silicon seal gasket that will seal the water tight. Durable materialrain barrel kit pvc safe, not crack, non-toxic, not fade, Fitting with 4 mm thick silicone seal gasket will contour to the shape of the round barrels. Practical design3/4 inch pvc rain barrel spigot kit, quickly and easily pour water from the rain barrel into the watering can versus a slow garden hose.
BrandYIYUN #ad
ManufacturerYIYUN #ad

10. WADEO

#ad

WADEO Brass Rain Barrel Quarter Turn Ball Valve Spigot with Bulkhead Fitting

#ad
WADEO #ad - Tools needed for installation: Electric drill, 1-1/8 inch hole saw, and pipe wrench or adjustable wrench. Heavy duty 1-1/8 inch without kink quarter turn solid brass ball valve.

Bulkhead fittings need 1 inch diameter holes to install. Fit up to 1. 3 inch thickness wall. Your good helper: we provide a thread seal tape and two washers 8mm between inner ring and outer ring, which can help you install the rain barrel spigot conveniently and effectively prevent leakage. Two installation methods: Brass bulkhead fittings front mounting and back mounting. Heavy duty 3. 14 oz solid brass bulkhead fitting, 1-1/8 inch female threaded all the way, install spigot on either end.
BrandWADEO #ad
ManufacturerWADEO #ad
Weight0.51 Pounds

Top 7 Rose Fertilizer Spikes – Kitchen & Dining Features

Top 10 Seed Starter Tray Kit, Peat Pots for Seedlings – Plant Germination Trays