As an Amazon Associate I earn from qualifying purchases.
1. Hylaea #ad
For Outdoor Cooling System, 1/4'' Slip-Lock, Water Brass Misting Mister Nozzle, Outdoor Mist Tee Nozzle, With Thread 10/24 UNC Tees 10pcs and 0.4mm Orifice Nozzle 12pcs, Misting Nozzles Kit #adHylaea #ad
- Suitable for 1/4'' pipe ; quick pushing Nozzle seat;Thread size is UNC10-24;. Misting nozzle tees 10pcs and Brass Nozzle 12pcs and 1 Plug in a bag;. Working pressure: 30 BAR 450 PSI ;.
Minimum working pressure：30psi2-3kg;max. Low pressure mist nozzle seat; For outdoor use with cold water only;. Thread size is unc10-24 ; orifice Mist nozzle Diameter: 04mm; stainless steel orifce.
2. MIXC #ad
Support Stakes, 39pcs Barbed Fittings, MIXC 1/4-inch Mist Irrigation Kits Accessories Plant Watering System with 50ft 1/4” Blank Distribution Tubing Hose, 20pcs Misters, Model: GG0B, Quick Adapter #adMIXC #ad
- Up to 70 percent water savings compared to manual watering. The nozzle has two water outlet modes, columnar and misty, you can adjust the nozzle according to your needs.
Mixc irrigation kit is great for agriculture, greenhouse, patio, lawn, garden, swimming pool misting fog cooling irrigation. The irrigation tubing is made from high quality, all of the fittings are made from high quality plastic.
No longer worried about leaving home for holiday, just add an auto timer buy separately to control GG0B irrigation kit. Flow rate of each mister: 6. 7-7 l/hour, max spray diameter: 03m. Precise drip watering for green, healthy plant growth with low water usage.
3. Yotako #ad
Yotako 1/4'' Slip-Lock Misting Nozzles Kit 12x Brass Mister Nozzles 0.3mm 10/24 UNC+ 10x Nozzle Tees+ 1x Plug, Fog Nozzles for Patio Misting System Outdoor Cooling System Garden Water Mister #adYotako #ad
- Mister nozzles-- 10/24 unc thread, self-sealing o-ring included, 0012'' 03 mm orifice, leak-proof no tape or sealant is required, stainless steel brass body, completely pre-assembled system delivers very fine mist to significantly cool the air in the hottest summer weather. Renew misting set up-- operation pressure: 20-70kg/cm, patio mister systems, best clogged mister nozzles replacement for DIY homemade low pressure greenhouse, working pressure: 30- 450psi, cools the surrounding air temperatures up to 20 degrees, outdoor misting misters cooling system, umbrella, Flow Rate: 80-145ml/Min, drip irrigation kit.
Maintain fog nozzles-- hard water, replace sediment filters not included, Remove them at the end of the season, lime and calcium may clog the fogger nozzles, clean nozzles periodically by soaking them in vinegar & warm water solution, Cooling and humidifier function bring you a cool summer and a more healthy life.
Misting nozzle tees-- slip lock quick pushing, great used for water cooling, fit for 1/4'' misting systems, it can delivers very fine mist to significantly cool the air in the hottest summer weather. Package-- 10 x slip-lok misting nozzle tees, 1 x end plug, no electricity, those misting cooling system directly use tap water to spray and cool down, 12 x Nozzles, and can save 70% of water when compare with manual watering on irrigation you, patio misters for cooling.
4. Landgarden #ad
Misting Cooling System Water Irrigation Fan Misting Mister Kit 33FT 10M Misting Line + 12 Brass Mist Nozzles + 3/4” Brass Adapter for Outdoor Patio Garden Greenhouse #adLandgarden #ad
- Easy to diy install: providing you all the accessories you need for a air cooling and plant misting system, only need 10 minutes to Installs as your idea, delivers very fine mist to significantly cool the air in the hottest summer weather. Upgrade quality: updated mist system nozzle are made of precision brass, high quality UV treated flexible tubing, Easy assemble, pre-assembled brass adapter, leak-proof and self-sealing Tee Joint, resistant to yellowing hydrolysis and microbial degradation, and meanwhile UV up to 3.
5 or more. Saving energy and water: misting cooling system directly use tap water to spray and cool down, no electricity consumption. Compare with manual watering on irrigation you can save 70% of water. Comparing with air humidification machine it works faster and more efficient.
Creating a natural cooling area : the fantastic outdoor cooling system provides a natural water cooling area, release you from the indoor bad air conditions and enjoy the fantastic outdoor sight in hot summer, surrounding air temperatures up to 20 degrees. Wide application: misting cooling system widely apply for garden, humidification, greenhouse, deodorant air purification, outdoor cooling system, swimming pool misting fog cooling, landscaping, mist mosquito system and so on.
5. HOMENOTE #ad
HOMENOTE Misting Cooling System 26.3FT 8M Misting Line + 8 Brass Mist Nozzles + a Metal Adapter3/4” Outdoor Mister Patio Garden Greenhouse Trampoline for Water Park #adHOMENOTE #ad
- Wide application: misting cooling system widely apply for garden, humidification, deodorant air purification, landscaping, Trampoline water park, Swimming pool misting fog cooling, greenhouse, outdoor cooling system, Mist mosquito system and so on.
Upgrade high quality: use of precision brass misting nozzle keypunch, made with high quality UV treated flexible tubing, resistant to yellowing, resistant to UV up to 3.5 or more, resistant to hydrolysis, sophisticated production, resistant to microbial degradation.
Turn down the heat: the fantastic outdoor cooling system provides a cool environment from the heat for your favorite outdoor areas, cools the surrounding air temperatures up to 20 degrees.
Energy conservation and environmental protection: Misting cooling system directly use tap water to spray and cool down, no electricity consumption, no energy consumption, save more money for you, and be an environmentalist. Easy to install: completely assembled system Installs in less than 10 minutes, delivers very fine mist to significantly cool the air in the hottest summer weather.
6. Redaiyuling #ad
With Thread 10/24 UNC Tees 10pcs +1Plug + 0.4mm Brass Nozzle 12pcs for Outdoor Cooling System, Redaiyuling Mist Kit 1/4'' Slip-Lock,Misting Nozzles Kit #adRedaiyuling #ad
- Mist kit 1/4'' slip-lock including: misting tee connecter 10pcs and 1Plug and Misting Nozzle 12pcs in a bag;. Brass nozzle size: hole diameter: 04mm;10/24 unc for low pressure system;.
Application:cooling system; garden; greenhouses; landscaping;humidification;. Feature:quick push nozzle seat;Easy to install;. Good quality: material: Brass and stainless steel orifice which can be used for a long time;.
7. Balidao #ad
Balidao Brass Misting Nozzles, 0.4mm Orifice Nozzle 13pcs and 1plug, Water Mist Kits for Outdoor Cooling System with Thread 10/24 UNC Tees 11pcs #adBalidao #ad
- Save money: save money, save time and complete fittings. Misitng packing including: misting nozzle 13pcs, mist seat 11pcs, 1 plug and 10 cable ties;.
You only need to buy mist pipes to install simply, and a spray system can be completed. Working pressure: 2-3kg under normal pressure; maximum working pressure: 30bar 450psi;. Ideal outdoor products: suitable for cooling, humidification, greening, air purification and other outdoor spray systems.
It's a must for summer. Parameters: suitable for 1/4 "pipe, sliding lock is pushed quickly, diameter is 0016" 04mm; stainless steel hole, thread size is UNC 10-24, each nozzle is equipped with self sealing O ring;.
8. EONBON #ad
EONBON Misting Nozzles Kit 12pcs Brass Mister Nozzles 0.4mm 10/24 UNC, 10pcs Thread Misting Nozzle Tees 1/4" Slip-Lok with 1pcs Plug for Misting System Outdoor Cooling System #adEONBON #ad
- Package: 10pcs misting nozzle Tees and 12pcs Brass Misting Nozzles with 1 x Plug. Application: suitable for misting system, Low pressure nozzle seat, great for any outdoor cooling space including patios, decks, porches, poolside or play areas.
Misting nozzles: thread size is unc 10-24; Orifice diameter is 0016¡± 04mm; stainless steel orifice. Parameter: mist nozzles can work under normal pressure: 2-3kg; Max working pressure: 30 BAR 450 PSI. Misting nozzle tees: suitable for 1/4'± pipe; Slip lock quick pushing.
9. Aootech #ad
Aootech Brass Misting Nozzles for Outdoor Cooling System 22 pcs,0.012" Orifice 0.3 mm 10/24 UNC #adAootech #ad
- Best choice for Outdoor Use With Cold Water. Screw into any 10/24-Threaded Mist Nozzle Opening. High quality: made of brass, never Rust.
Flow rate:80-145ml/Min. Minimal water use of 1/2 gallon Of Water Per Hour Per Nozzle. Operation pressure:20-70kg/Cm. High cost performance:20pcs+2pcsExtra Bonus=22pcs.
10. EONBON #ad
EONBON Misting Nozzles Kit 12pcs Brass Mister Nozzles 0.4mm Orifice Thread 10/24 UNC with 10pcs 1/4" Slip-Lock Misting Nozzle Tees and 1 x Plug for Outdoor Patio Misting Cooling System #adEONBON #ad
- Parameter: can work under normal pressure: 2-3kg; Max working pressure: 30 BAR 450 PSI. Misting nozzles: thread size is unc 10-24; Orifice diameter is 0016” 04mm; stainless steel orifice. Misting nozzle tees: suitable for 1/4” pipe; Slip lock quick pushing.
Package: 10pcs misting nozzle Tees and 12pcs Brass Misting Nozzles with 1 x Plug. Application: low pressure nozzle seat, porches, great for any outdoor cooling space including patios, decks, poolside or play areas.