As an Amazon Associate I earn from qualifying purchases.
SLEPL #ad - Uses: two-in-one dropper punch and 1/4 fitting insertion tool, used for piercing and perforating when installing the dropper and micro sprinkler in the polyethylene tube.
Tight fit: the punching size is 0118 inches, which can be closely fitted to eliminate waste and maintain proper pressure in the drip system. Customer service: if you have any questions about our products, please contact with us, we provide mail response service and perfect after-sales service.
Orbit #ad - For outdoor use with cold water only. Compatible with standard 1/2-inch drip tubing. Durable construction provides years of reliable use. Use to punches holes in 1/2-inch tubing for installing 1/4-inch fittings and drippers. For above or below ground installation.
Honoson #ad - The package includes: 1 drip irrigation pipe punching machine and 50 drip irrigation plugs, a reasonable package for your daily use; Note: drip irrigation plugs do not have holes. Appropriate size: the punch size is 3 mm 0118 inch, or one end of any 1/4 inch feeder is covered, which can fit tightly to eliminate waste and maintain proper pressure in the drip system.
Easy to use: the sturdy hole punch tool is simple and easy to use, just insert the pipe and gently push the hole punch until it is pierced; For anyone with a miniature or drip irrigation garden watering system, drip Irrigation tubing hole punch tool and drip irrigation plugs are essential tool kits. One end is suitable for standard holes of 3 mm-6 mm, and the other end is suitable for worn transmitters of 7 mm or about 1/4 inch Hole; this multifunctional stopper is suitable for filling into 1/2 inch drip irrigation pipe.
Scope of application: irrigation pipe puncher can be applied to perforate polyethylene pipes for installation of drippers and micro nozzles; suitable for PE pipes with diameters of 16 mm and 20 mm; the puncher is of suitable size, light weight, and easy to carry And storage, it does not take up space.
WORAMUK #ad - 2-in-1 punch and fitting insert: the drip irrigation hole punch tool is designed to fit for drip tubing punch and 1/4 fitting insertion use; Hold the handle of the drip irrigation tubing punch and clamp the tube, gently press it until the tube is pierced; The hole size is 4 mm/ 012 inch to ensure the proper insertion of the connector, fitting and emitter, making the installation more closely fitting.
Application: this 2-in-one drip irrigation tubing hole punch & fitting insertion tool can be used to puncture holes when installing drippers and micro-sprinklers in polyethylene tubing.
Easy to use: simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left; Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole. Quality material: punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time.
Rain Bird #ad - Hardened steel punch and surgical steel blade. Spring-loaded 2-in-1 combination tool. Pierces a clean hole and provides a clean, square cut with no jagged edges or crushed tubing.
Mudder #ad - 3 mm/ 0118 inches, proper size can make sure that the pressure in the drip system is suitable and won't waste your materials; Please confirm whether it meets your needs before buying. Durable to use: the drip tube hole punch is mainly made of quality plastic material with material which is not easy to get corroded, sturdy and long lasting use, will bring you a nice using experience.
2-in-1 punch and fitting insert: our irrigation tool kit is suitable for both drip tubing punch and 1/ 4 fitting insertion use, it can help to punch the proper hole for easier operation.
How to use: simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left; Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole, very convenient and easy to use. About size: the punch hole measures approx.
FOGWOWO #ad - The appropriate size can ensure that the pressure in the drip system is appropriate and your materials will not be wasted; please confirm whether it meets your needs before buying. Convenient and easy to use.
Products include::you will get 1 good quality blue hole punch and 20 pcs 1/4 plugs. 2 in 1 hole punch and accessory insert: our irrigation tool kit is suitable for both drip pipe hole punch and 1/4 accessory insert.
Use: used to puncture holes when installing drippers and micro sprinklers in polyethylene tubing. When you use the hole punch, you can also use it with the plug, which is enough to meet your daily needs. About size: the punching size is about 3 mm/0118 inches.
Raindrip #ad - Barbed fittings and emitters; inserts ¼ in. Fittings and emitters. Comes with one 4-in-1 Cut N’ Punch Tool. Tube cutter has a stainless steel blade and works like scissors; Hole puncher has a metal tip to penetrate tubing wall when plunger is pressed down; tubing shelf keeps supply tubing in place.
Barbed fittings and emitters with ¼ in. Supply tubing to punch holes to fit ¼ in. Barbed inserts; removes ¼ in. Multifunctional 4-in-1 cut n’ punch tool cuts through supply tubing, removes emitters and fittings, punches holes in supply tubing, and inserts emitters and fittings.
Raindrip #ad - Hand-held tool is designed with a comfortable pistol grip for strain-free use; Metal hole punch tip penetrates tubing wall when handgrip is pressed; Sliding shelf on tubing rest slides out to accommodate larger sized tubing.
Barbed fittings and emitters with ¼ in. Barbed fittings and emitters with ¼ in. Barbed inserts; works anywhere along the length of supply tubing where you want to insert a micro fitting or dripper.
1. SLEPL
#adFor Easier 1/4" Inch Fitting & Emitter Insertion, 2-in-One Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool
#adTight fit: the punching size is 0118 inches, which can be closely fitted to eliminate waste and maintain proper pressure in the drip system. Customer service: if you have any questions about our products, please contact with us, we provide mail response service and perfect after-sales service.
More information #ad
Easy to grip: the handle is made of durable plastic and non-corrosive material. Function: pierce holes of suitable size to connect accessories and connectors.| Brand | SLEPL #ad |
| Manufacturer | shenzhen #ad |
More information #ad
2. Orbit
#adOrbit DripMaster 67756 Drip Tubing Punch Tool
#adMore information #ad
| Brand | Orbit #ad |
| Manufacturer | Orbit Underground/Sunmate #ad |
| Height | 3 Inches |
| Length | 1 Inches |
| Weight | 0.02 Pounds |
| Width | 1 Inches |
| Part Number | 67756 |
| Model | 67756 |
More information #ad
3. Honoson
#ad1 Pcs Drip Irrigation Tubing Hole Punch Tool for Easier 1/4 Inch Fitting Emitter Insertion and 50 Drip Irrigation Plugs Goof Plugs for Hose or Tubing End Caps Puncture to Insert Fittings Fresh Style
#adEasy to use: the sturdy hole punch tool is simple and easy to use, just insert the pipe and gently push the hole punch until it is pierced; For anyone with a miniature or drip irrigation garden watering system, drip Irrigation tubing hole punch tool and drip irrigation plugs are essential tool kits. One end is suitable for standard holes of 3 mm-6 mm, and the other end is suitable for worn transmitters of 7 mm or about 1/4 inch Hole; this multifunctional stopper is suitable for filling into 1/2 inch drip irrigation pipe.
More information #ad
Both ends of the irrigation plug are of different sizes. Practical and durable: the punching tools are made of quality plastic and metal, waterproof, sturdy and durable, which is not easy to break or deform, and the punch has been polished, not easy to rust and damage; the plastic part of the punch allows you to hold it comfortably, practical and durable, so it will not change It is blunt and can serve you for a long time; the drip irrigation pipe plug is made of quality plastic, and can be applied outdoors in sunlight or rainy weather. Scope of application: irrigation pipe puncher can be applied to perforate polyethylene pipes for installation of drippers and micro nozzles; suitable for PE pipes with diameters of 16 mm and 20 mm; the puncher is of suitable size, light weight, and easy to carry And storage, it does not take up space.
| Brand | Honoson #ad |
| Manufacturer | Honoson #ad |
| Part Number | Honoson-eedq4 |
More information #ad
4. WORAMUK
#ad2-in-1 Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool Kit for Easier 1/4" Inch Fitting & Emitter Insertion Drip Sprinkler Systems Blue
#adApplication: this 2-in-one drip irrigation tubing hole punch & fitting insertion tool can be used to puncture holes when installing drippers and micro-sprinklers in polyethylene tubing.
More information #ad
Humanized design: the smartly designed fitting insertion tool will make you feel untired even after using it for a long time; It can help you drill easily and fast and save time and energy for you; The combination of blue and black color makes the drip irrigation punch beautiful and delicate. Easy to use: simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left; Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole. Quality material: punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time.
| Brand | WORAMUK #ad |
| Manufacturer | WORAMUK #ad |
More information #ad
5. Rain Bird
#adRain Bird HPTCX Drip Irrigation 2-in-1 Combination Tubing Cutter/Hole Punch Tool
#adMore information #ad
Superior ergonomic grip. Cuts all sizes of drip tubing and also punches holes for drippers and 1/4" fittings. Highly visible purple color allows tool to be easily seen in grass, bark, soil, mulch etc.| Brand | Rain Bird #ad |
| Manufacturer | Rain Bird #ad |
| Height | 2.15 Inches |
| Length | 0.89 Inches |
| Weight | 0 Pounds |
| Width | 0.89 Inches |
| Part Number | HPTCX |
| Model | HPTCX |
More information #ad
6. Mudder
#adMudder 3 Pieces 2-in-1 Drip Irrigation Hole Punch Tool Drip Tube Hole Punch Fitting Insertion Tools for 1/4 Inch Fitting Emitter Insertion Drip Sprinkler Systems
#ad2-in-1 punch and fitting insert: our irrigation tool kit is suitable for both drip tubing punch and 1/ 4 fitting insertion use, it can help to punch the proper hole for easier operation.
More information #ad
What you get: you will receive 3 pieces of drip irrigation tubing hole punches in total, come with bright blue colors, sufficient quantity for your daily using. How to use: simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left; Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole, very convenient and easy to use. About size: the punch hole measures approx.
| Brand | Mudder #ad |
| Manufacturer | Mudder #ad |
More information #ad
7. Dig
#adDrip Irrigation Standard Tubing Hole Punch
#adDig #ad - Used to puncture holes when installing drippers and micro sprinklers in polyethylene tubing. Punches holes measuring 3 mm 0118 inches for a snug fit to eliminate waste loss and maintain appropriate pressure in your drip system.More information #ad
Easy grip handle constructed of durable plastic and non-corrosive materials,. Punches the perfect size hole to attach fittings and couplers.| Brand | Dig #ad |
| Height | 1 Inches |
| Length | 3 Inches |
| Weight | 0.02 Pounds |
| Width | 1 Inches |
| Part Number | 16-020 |
More information #ad
8. FOGWOWO
#adFOGWOWO 2-in-One Drip Irrigation Tubing Hole Punch with 20 PCS Plugs，Used for 1/4-inch Accessory Launcher Plug-in Drip Nozzle SystemBlue 1pcs
#adProducts include::you will get 1 good quality blue hole punch and 20 pcs 1/4 plugs. 2 in 1 hole punch and accessory insert: our irrigation tool kit is suitable for both drip pipe hole punch and 1/4 accessory insert.
More information #ad
It can help perforate appropriate holes for easy operation. How to use: simply press the tool through the pipe, and leave a pre-drilled hole on the punch tool; insert the fitting into the pipe, then slide the pipe according to the slot and push the fitting into the pre-cut hole. Use: used to puncture holes when installing drippers and micro sprinklers in polyethylene tubing. When you use the hole punch, you can also use it with the plug, which is enough to meet your daily needs. About size: the punching size is about 3 mm/0118 inches.
| Brand | FOGWOWO #ad |
| Manufacturer | FOGWOWO #ad |
More information #ad
9. Raindrip
#adPack of 1, Raindrip 63500UB Cut N Punch Tool
#adBarbed fittings and emitters with ¼ in. Supply tubing to punch holes to fit ¼ in. Barbed inserts; removes ¼ in. Multifunctional 4-in-1 cut n’ punch tool cuts through supply tubing, removes emitters and fittings, punches holes in supply tubing, and inserts emitters and fittings.
More information #ad
Cuts a variety of supply tubing sizes; holds ½ in. 5/8 in. And 0710 in. Notched claw on handle hitches onto barbed inserts on emitters and fittings for pull out; Holder on end of handle fits tops of emitters and fittings for insertion into supply tubing.| Brand | Raindrip #ad |
| Manufacturer | Raindrip #ad |
| Height | 1.5 Inches |
| Length | 1.1 Inches |
| Weight | 0.3 Pounds |
| Width | 10 Inches |
| Part Number | 63500UB |
| Model | 63500UB |
| Warranty | Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling. |
More information #ad
10. Raindrip
#adRaindrip 63100UB Professional Hole Punch
#adBarbed fittings and emitters with ¼ in. Barbed fittings and emitters with ¼ in. Barbed inserts; works anywhere along the length of supply tubing where you want to insert a micro fitting or dripper.
More information #ad
Supply Tubing to punch holes. Barbed inserts. The hole punch tool punches a hole in supply tubing to insert fittings to connect tubing or drippers with barbed inserts; Holds ½ in. 5/8 in. And 0710 in. Comes with one Pistol Grip Hole Punch Tool. Punch holes in supply tubing for easier insertion of ¼ in. Supply tubing to punch holes to fit ¼ in. Use with ½ in. 5/8 in. Or 0710 in.| Brand | Raindrip #ad |
| Manufacturer | Raindrip #ad |
| Height | 4 Inches |
| Length | 16 Inches |
| Weight | 0.17 Pounds |
| Width | 8 Inches |
| Part Number | 63100UB |
| Model | 63100UB |
| Warranty | Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling. |
More information #ad
