As an Amazon Associate I earn from qualifying purchases.
1. ISCORK #ad
Irritec P1 5/8" drip Tape 15 mil 6" Spacing 0.46 GPH 500' Roll #adISCORK #ad
- Each dripper has an integrated inlet filter to prevent clogging. The low profile drippers welded on the inside wall keeps friction loss to a minimum. P1 drip tape is manufactured using injection molded drippers for a high degree of plugging resistance and uniform water distribution over long runs.
P1 drip tape is used in both above ground and subsurface installations with equal success. P1 drip tape has no seams for more reliability and uniform installation.
2. Hoss Tools #ad
Hoss Tools Drip Tape Row End | 20 Pack | for 5/8" Drip Tape #adHoss Tools #ad
- Easy Installation. Secure fit Prevents Leakage. 20 pack of row End Closures. Works with 5/8" Drip Tape. Water your Garden More Effectively! .
3. Hoss Tools #ad
Hoss Tools Drip Tape Row Start | 20 Pack | 1/4" Barb for 5/8" Drip Tape #adHoss Tools #ad
- 20 pack of row Start Fittings. Works with 5/8" Drip Tape. 1/4" barb for inserting into Mainline Tubing. Threaded Fittings to Prevent Leakage. Water your Garden More Effectively! .
4. One Stop Outdoor #ad
500' Foot Roll Premium USA Made Drip Tape Irrigation Tubing P1 5/8 15MIL .46GPH 6" Inch Emitter Spacing Professional Agricultural Water Line #adOne Stop Outdoor #ad
- Design of the labyrinths reduce pressure sensitivity and increases the self-cleaning effect thanks to the level of turbulence. Excellent uniformity : performance and the possible combination of low flow rates of the dripper.
Proudly made in the usa. Integrated filter : Avoids clogging phenomena occurring. Use : ideal solution for spacings over 20 cm.
5. Irritec #ad
Irritec Tape x 1/4" Barb 20 pk #adIrritec #ad
- If leakage continues to occur, a 1/4 turn with pliers should suffice. Simply punch a hole in the mainline tubing, connect the drip tape to the tape end of the fitting and insert the barbed end into the punched hole.
Does not connect to 1/4" tubing. The barb on this fitting is slightly larger than the a standard 1/4" barb.
Make the appropriate sized hole for this fitting. To create a tight seal, be sure tape is warm and pliable before attaching the 5/8" start fittings and end fittings. This fitting allows a flow of 80 GPH at 10 PSI. This fitting is used to connect 5/8" drip tape to mainline tubing.
6. One Stop Outdoor #ad
Premium USA Made Drip Tape Irrigation Tubing P1 5/8 15MIL .17GPH 8" Inch Spacing Professional Agricultural Water Line, 100ft Roll #adOne Stop Outdoor #ad
- Integrated filter : Avoids clogging phenomena occurring. Design of the labyrinths reduce pressure sensitivity and increases the self-cleaning effect thanks to the level of turbulence.
Use : ideal solution for spacings over 20 cm. Proudly made in the usa. Excellent uniformity : performance and the possible combination of low flow rates of the dripper.
7. Tondiamo #ad
20 Pieces Drip Irrigation End Cap, 1/2 inch Universal Drip Irrigation Coupling Connector Drip Tubing Fittings Compatible with Most 16-17 mm Drip Tape AG Tubing Drip or Sprinkler Systems #adTondiamo #ad
- Compatible with: these drip tape couplings are compatible with 16 mm and 17 mm drip irrigation tubes, farm, residential, can also be applied for elevated garden beds, greenhouse horticulture and agricultural watering applications.
Reliable plastic material: drip irrigation tubing end cap plugs are made of plastic, sturdy and firm, without unpleasing smell, not easy to break, can be applied for a long time. Easy to operate: these drip irrigation connectors are easy to install, just push the tube into the end cover joint to fit tightly without leakage, if needed, no glue, you can use a hair dryer to soften the end of the tube first.
Adaptation conditions: these drip sprinkler plugs are suitable for 1/2 inch drip irrigation tube joints; The proper water pressure is about 30 PSI; The end grips the tube to ensure a secure no leaking connection, and the twist lock adds fixation to the tubing for a secure connection.
Adequate quantity: package includes 10 pieces of drip irrigation system hose connectors and 10 pieces of 1/2 inch drip irrigation couplings, enough for meeting your daily needs.
8. MultiOutools #ad
MultiOutools Drip Irrigation Tubing Fitting Kit,Irrigation Barbed Connectors Water Hose Connector for 1/2 inch Universal Connector Drip Tubing Fittings, Compatible with 16-17 mm Drip Tape Tubing #adMultiOutools #ad
- Easy to install -- no glue, fixtures, tools, or any other additional tools is required. The twist-lock design ensures reliable tightness and will not leak. The joint of the drip hose and irrigation kit can handle an inline pressure of 30 PSI.
Leak-free design -- the twist lock design increases additional fixing to the drip irrigation tubing to ensure a reliable connection. Gardening tools -- these 16mm drip irrigation parts fit most brands of 1/2” irrigation tubing.
Drip irrigation drip irrigation kit -- the irrigation kit includes 4 Couplings, enough to be a backup for your daily use such as agricultural irrigation, greenhouse gardening, 2 Tees, gardens, and 2 Switch Valves, 2 Elbows, 4 Ends, etc.
It is made for long-time use, anti-aging, which is eco-friendly, you can install it in your garden or farm and simply irrigate with a master switch. Just push the tube firmly over the barb and tighten the nut. Durable material -- these drip irrigations are made of high-quality and sturdy plastic, and anti-ultraviolet. Please check the size carefully, hose connectors with suitable diameters will handle high water pressure and avoid leakage.
9. Irritec USA #ad
Irritec P1 5/8' drip tape 15 mil 8" Spacing 0.46 GPH 1000' Roll #adIrritec USA #ad
- P1 drip tape has no seams for more reliability and uniform installation. The low profile drippers welded on the inside wall keeps friction loss to a minimum. P1 drip tape is used in both above ground and subsurface installations with equal success.
P1 drip tape is manufactured using injection molded drippers for a high degree of plugging resistance and uniform water distribution over long runs. Each dripper has an integrated inlet filter to prevent clogging.
|Brand||Irritec USA #ad|
10. IRRIGATION-MART #ad
IRRIGATION-MART Garden Kit A-BV 1000ft 10 Rows Vegetables #adIRRIGATION-MART #ad
- 100 ft of 5/8 inch poly header line. Kit is expandable with more row fittings, drip tape or add a timer and fertilizer injector.
Includes fittings to connect to a standard garden hose or faucet and a filter and pressure regulator. 1000 ft of thin-wall 12" spacing drip tape reusable. 10 row valve fittings on/off.