As an Amazon Associate I earn from qualifying purchases.

1. Blue Wave

#ad

Blue Wave Low Mount Spa Cover Lift

#adBlue Wave #ad - Fits most square & rectangular spas up to 8 ft wide with radius corners. Backed by a 1-year warranty. Won't rust or corrode over time. Makes lifting your spa cover easy. Constructed of high quality powder-coated steel.

Brand	Blue Wave #ad
Manufacturer	Blue Wave Products #ad
Height	1 Inches
Length	69 Inches
Weight	20 Pounds
Width	102 Inches
Part Number	NP5022
Model	NP5022
Warranty	1 year warranty

2. UltraLift

#ad

UltraLift Under Mount Spa Cover Lift

#adUltraLift #ad - Requires 16" of clearance behind the spa. Under mount Spa Brackets. Fits spas up to 109". Fits radius up to 16".

Brand	UltraLift #ad
Manufacturer	SMP #ad

3. SpaEase

#ad

SpaEase 100 Hot Tub Coverlift

#adSpaEase #ad - Cannot be installed on round hot tubs, hot tubs with a corner radius over 10", Hot Tubs larger than 96", Requires mounting brackets to be screwed into cabinet of Hot Tub. Installation of hot tub coverlifts will require you to drill and fasten lift to your Hot Tubs Cabinet Structure and might require additional support depending on Hot Tub Manufacturer. Please read below to make sure this lift will fit your hot tub. Requires just 10 to 15 inches of clearance behind the spa and 5 inches on each side. Installs easily on hot tubs 96" or less with a corner radius on 10" or less.

Brand	SpaEase #ad
Manufacturer	SpaEase #ad
Part Number	SEL100

4. LOVATIC

#ad

SpaEase 200, Hydraulic Hot Tub Coverlift

#adLOVATIC #ad - Cannot be installed on round hot tubs, hot tubs larger than 96", hot tubs with a corner radius over 10", Requires mounting brackets to be screwed into cabinet of Hot Tub.

Fits square or rectangle hot tub Covers up to 96" with Corner Radius up to 10". Does not include cover - lifter only - please read carefully to make sure this will worK ON YOUR HOT TUB. Required 10" - 12" of clearance Behind Hot Tub and 6" on Sides. Installation of hot tub coverlifts will require you to drill and fasten lift to your Hot Tubs Cabinet Structure and might require additional support depending on Hot Tub Manufacturer.

Brand	LOVATIC #ad
Manufacturer	SpaEase #ad
Part Number	SEL200

5. Puri Tech

#ad

Puri Tech Cover Lifts, Pivot Top Mount Spa & Hot Tub Cover Lift Removal System Reinforced Brackets Double Coated Aluminum Structure Fits Most Spas & Hot Tubs

#adPuri Tech #ad - Easy to use! just fold cover over the full-length center bar and use the padded handle to pull over the back of the spa. Includes 3-hook towel holder puri tech pivot includes towel hooks for convenient storage. Fits most spas up to 96". Reinforced plastic brackets lengthen the life of your new cover lifter. Corner radius up to 12". Made of durable double coated aluminum tubing & stainless steel hardware reducing the chance of rust over time. Clearance requirements: 10" to 15" behind the spa & 5" on each side.

Brand	Puri Tech #ad
Manufacturer	Puri Tech #ad
Part Number	PRS-101-PIVOT

6. The Cover Guy

#ad

Spa Cover Lift, Opens Easily With One Hand, The Cover Guy, Fits up to 96x96 Inch, Strong & Compact, 1-Year Warranty, Improve Your Hot Tub Experience, Hydraulic Hot Tub Cover Lifter

#adThe Cover Guy #ad - Improve your hot tub experience - your hot tub lid won't need to sit on the ground anymore and you won't have to struggle to get the cover back on after relaxing in the spa. Simple to install - the easy to assemble design of this hot tub cover lift removal system comes with simple instructions and a customer service hotline in case you need any help.

Easy to open & close with one hand - over 4, 000 happy customers every year choose the Cover Guy Hydraulic Hot Tub Cover Lifter because it's strong, compact and you can open and close it with one hand. It also comes with a limited lifetime warranty covering manufacturing defects that will give you extra reassurance that our spa cover lifters are of superior quality to any other on the market. Warranty limited lifetime - we're confident the cover guy hydraulic assist hot tub Cover Lifters will make your spa experience easy and even more enjoyable. With this strong spa cover lifter you can maintain your relaxed state! Fits any cover up to 96 inches both ways and effortlessly handles the cover.

The compact design requires a minimal amount of clearance and can snuggly fit any backyard hot tub location, set in the deck or inside a gazebo. The cover guy's 30 years of experience ensures this quality spa cover lift will make your spa experience easier and more enjoyable! Strong & compact - these hot tub cover lifters include powder-coated aircraft aluminum tubing, whether it's against a wall, which virtually eliminates twisting and torquing. The rust and corrosion-resistant gas springs not only make it easy to lift with one hand, but they also ensure years of reliable and maintenance-free use.

Brand	The Cover Guy #ad
Warranty	1 Year Limited Warranty

7. Spa Depot

#ad

The Slider Spa Cover No-Lift Remover & Storage System, Dual Roller Retractable Arms

#adSpa Depot #ad - Storage system only spa cover not included. Simple installation - fits all spa shapes. Hot tub cover Storage Solution. 4 easy-slide rollers per arm. Folds neatly away when not in use.

Brand	Spa Depot #ad
Manufacturer	Spa Depot #ad
Part Number	4336593699

8. Smart Spa

#ad

Smart Spa CoverClassic Classic Hot Tub Cover Lifter, One Size, Black

#adSmart Spa #ad - Reduces wear & tear on Cover- Cover Lasts Longer. Lifts & stores cover behind Spa - Fold Back, Lift Up, Store Cover. Fits square or rectangle hot Tubs up to 96" - Low Profile Design Blends Easily. Easy to install & use - no Cover Handling - No Gas Shocks. Does not work with sunken or inground spas. Powder coated aluminum - Requires 18" of Clearance Behind Spa.

Brand	Smart Spa #ad
Manufacturer	Smart Spa #ad
Height	99 Inches
Length	99 Inches
Width	96 Inches
Part Number	CoverClassic
Model	CoverClassic

9. SpaEase

#ad

SpaEase 150 Under Mount Hot Tub Cover Lift

#adSpaEase #ad - Does not require drilling into your hot tub. Depending on the spa setup the cover may require the spa to be emptied and lifted to install. When folded down, the cover stores neatly on the side of spa to provide a full view. Heavy duty steel Zinc-Plated and Powder Coated Finish. Under-spa plates are held securely in place by the weight of the spa plates measure 8. 75x8. 75".

Brand	SpaEase #ad
Manufacturer	SpaEase #ad

10. Smart Spa Supply

#ad

Smart Spa, Spa/Hot Tub Top Mount Cover Lifter, Industry Standard Design Black

#adSmart Spa Supply #ad - Comes in black OR Silver. A padded handle and a full-length center bar makes operation easier. Double coated aluminum tubing and stainless-steel hardware dramatically minimizes potential rusting. 3 hook towel holder. New reinforced plastic brackets extend the lifter’s life.

Brand	Smart Spa Supply #ad
Manufacturer	Smart Spa Supply #ad
Height	48 Inches
Length	96 Inches
Weight	4.99 Pounds
Width	96 Inches
Part Number	CoverOne
Model	CoverOne