Top 10 30A MPPT Solar Charge Controller – Renewable Energy Controllers

As an Amazon Associate I earn from qualifying purchases.



Solar Charge Controller Max 100V Input Negative Grounded Solar Regulator, EPEVER MPPT Solar Charge Controller 30A 12V 24V Auto, for Lead-Acid and Lithium Batteries

EPEVER #ad - Auto identifying 12V/24V DCsystem voltage. Also compatible with various Deep Cycle battery options: Sealed,. It protect the battery from being over-charged by the solar modules and over-discharged by the loads. Maximizing the energy from solar panels to charge your system.

This mppt controller protection built-in against reverse polarity, short-circuiting, over-discharging, overload, overcharging, and reverse current. Solar charge regulator support pc software, gel, flooded and lithium. The tracer an's charging process has been optimized for long battery life and improved system performance. It includes a 4-stage battery charging Bulk, Float, Boost, and Equalization and temperature compensation increase your battery life and improve your system's performance.

Negative ground charge controller featuring advanced MPPT technology with high tracking efficiency up to 99. 5% and peak conversion efficiency of 98%. Multiple load control method, APP and MT-50 Die-cast aluminum design allows for efficient heat dissipation. Mppt charge controller with blackligh LCD screen for displaing system information and working condition.
BrandEPEVER #ad
ManufacturerEPEVER #ad

2. Victron Energy


Victron Energy SmartSolar MPPT 100V 30 amp 12/24-Volt Solar Charge Controller Bluetooth

Victron Energy #ad - Anytime anywhere remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

The intelligent load output function prevents damage caused by running batteries 'flat'. The smartsolar charge controller will even recharge a severely depleted battery. Smartsolar mppt 100-volt 30 amp: a solar charger gathers energy from your solar panels, Using the latest, fastest technology, and stores it in your batteries, SmartSolar maximises this energy-harvest.

You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries. By constantly monitoring the voltage and current output of your solar PV panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.
BrandVictron Energy #ad
ManufacturerVictron Energy #ad
Height3.54 Inches
Length8.07 Inches
Weight2.82 Pounds
Width5.12 Inches
Part NumberSCC110030210

3. Renogy


Flooded Batteries & Bluetooth Module, Grey, Gel, Renogy Rover 30 Amp 12V/24V MPPT Solar Charge Controller Battery Regulator Compatible with Lithium Sealed

Renogy #ad - Lcd screen and multiple led indicators for displaying system operation information, customizable parameters, and error codes. Aluminum heat sink allows for efficient heat dissipation. Intelligent protection built-in against reverse polarity, overcharging, over-discharging, short-circuiting, overload, and reverse current.

Rs232 port allows the rover pg to communicate with the BT-1 Bluetooth module, which can pair with the Renogy BT smartphone app. Power source type: Solar-Powered. Compatible with 12v and 24v systems. Positive ground controller featuring innovative mppt maximum power point tracking technology with high tracking efficiency up to 99%, Float, maximizing the energy from solar panels to charge your system.

4-stage charging bulk, boost, and Equalization and temperature compensation increase your battery life and improve your system's performance. Also compatible with various Deep Cycle battery options: Sealed, Gel, Flooded, and Lithium 12.8v lfp.
BrandRenogy #ad
ManufacturerRenogy #ad
Height4 Inches
Length10 Inches
Weight4 Pounds
Width7 Inches
ModelRover 30 Amp 12V/24V

4. Renogy


Renogy Rover 30 Amp 12V/24V DC Input MPPT Solar Charge Controller Auto Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery

Renogy #ad - Reverse protection: any combination of solar module and Battery, Flooded, and lithium. Conversion efficiency of 98%. Rs232 port allows the rover to communicate with the bt-1 Bluetooth module, which can pair with the Renogy BT Smart phone app.

4-stage charging: bulk, and equalization and LCD screen with programmable charging parameters. Automatically detect 12v or 24v dc system voltages innovative mppt technology with High tracking efficiency up to 99% and peak. Die-cast aluminum design for heat dissipation and the capability of measuring the battery's temperature and remote monitoring.

Error code detection for easy self diagnoses. Customizable charging voltages. Charges over-discharged Lithium-Ion batteries. Electronic protection: overcharging, gel, Float, overload, over-discharging, boost, without causing damage to any component. Compatible with various deep cycle battery options: sealed, and short circuit.
BrandRenogy #ad
ManufacturerRenogy #ad
Height2.85 Inches
Length9.37 Inches
Width6.81 Inches
Part Numberfit for Gel Sealed Flooded and Lithium
Modelfit for Gel Sealed Flooded and Lithium

5. Renogy


Sealed, Renogy Wanderer Li 30A 12V PWM Negative Ground Charge Controller Compatible with Lithium, Gel, and Flooded batteries and Renogy Bluetooth Module

Renogy #ad - Optimized for a 12v system; Deep cycle Sealed, Gel, Flooded, and Lithium battery option ready. Simple install: fully open the hatch CCW, insert the appropriate wires, and completely close the hatch CW.

Multiple led indicators for easy to read charge status and battery information. Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position. Then secure each cable by rotating the screws clockwise CW to the closed position. Wanderer10a|30a installation notes: the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.76 Inches
Length6.45 Inches
Weight0.29 Pounds
Width4.31 Inches
Part NumberRNG-CTRL-WND30-LI
ModelCharge Controller

6. PowMr


Negative Ground, Energy-Recording, Weatherproof Solar Charge for Sealed Gel Flooded Battery, PowMr 30A MPPT Charge Controller 12V 24V auto

PowMr #ad - Your satisfaction is our priority. Common negative ground, boost, 4-stage charging Bulk, float, and Equalization and temperature compensation process has been optimized for long battery life and improved system performance. Common negatIVE Ground. Power-off Memory Settings.

24hrs after-service from PowMr :[email protected] Com. This negative ground mt series - 30a mppt charge controller max input current: 30 amp; max input solar power : 360W12V; 720W24V; Max input Voltage: 50V; with tracking efficiency no less than 99. 9% and 12v/24v auto identifying system voltage, maximizing get more energy from solar panels into your battery. Real-time energy recording and statistical. Full electronic protection> solar-overload/ solar-short-circuit/ Low-voltage disconnect/ Over-charge/ High-temperature-current limit/ High-input-voltage-current-limit protection.

Available for DC load. Ports: 4 AWG. When the input power exceeds a certain level and the charging current is larger than the rated current, the controller will automatically lower the charging power and bring the charging current to the rated level. Compatible with various deep cycle battery options: sealed, gel and flooded with multiple load modes. This package including:1 30 amp mppt solar controller + 1 Temper sensor.
BrandPowMr #ad
ManufacturerPowMr #ad



EPEVER 30A MPPT Charge Controller with LCD Display 100V Max Input 12V/24V Auto Switch

EPEVER #ad - The products can track the MPP point fast and accurately in any situation which will improve energy efficiency and obtain the maximum solar energy. 30amp solar charge controller, tracer an series advanced MPPT control algorithm. Negative design MPPT controler, 2 years warranty;. Load:fit for small dc applications, like, LED, Fan, AC load should connect with inverterinverter connect to battery directly;. Controller fit for 12v/24v gel, flooded, Sealed, Lithium Battery; Battery voltage range:8-32V;. Max power controller suppport 390W12V;780W24V, Max input Voltage:100V;.
BrandEPEVER #ad
ManufacturerBeijing Epsolar Technology Co., Ltd. #ad
Height2.17 Inches
Length9.06 Inches
Width5.91 Inches
Part NumberPD-10806



EPEVER MPPT Charge Controller 30A 12V/24V Auto Max PV 100V Solar Panel Charging Generator Common Negative Ground Solar Regulator with LCD Display for Gel AGM Flooded Sealed Lithium Battery 30A MPPT

EPEVER #ad - International famous brands of st and ir's components of high quality and low failure rate are used, Charging power and current limitation function, which can ensure the product's service life, . Advanced mppt technology, perfecting system performance, with efficiency no less than 99. 5%, ultra-fast tracking speed and guaranteed tracking efficiency, high quality components, with maximum conversion efficiency of 98%, advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time ; Wide MPP operating voltage range, Accurate recognition and tracking of multiple-peaks maximum power point ;.

1 x temperature sensor as free gift original factory Products Suppllier by GolandCentury. Please feel free to contact with our team for techanical support, our engineer will help you to find suggestion and solution. Epever mppt solar charge controller 30a, 780w/24v. Real-time energy statistics function, with rs-485 communication bus interface and Modbus, The communication port adopts professional protection chip, communication protocol.

Monitor and set the parameters via mobile phone APP or PC software, Overheating power reduction function;Multiple load work modes, Full-load operation without any drop in capacity within the range of working. Tracer-an mppt controller is upgrade version then tacer-a series, Max PV input power 390W/12V, Max PV 100V, 12v/24v auto, Common Negative Grounding, Better funcations and advanced technology . Support gel agm flooded Sealed batteries and Lithium Batteries too.
BrandEPEVER #ad
ManufacturerEPEVER #ad
Height2.17 Inches
Length8.98 Inches
Width6.46 Inches
Part NumberTracer-AN

9. Beleeb


Beleeb 30A 12V/24V MPPT Solar Charge Controller,75V Max Input, PV Limited Power Input,Built-in Operation Log Aand Temperature Compensation

Beleeb #ad - Pv array limited power input function. Normal mode, sensor mode, account system working state and humanized lcd displaying, FLD Built-in operation log, 3 types battery dataSEL, Timer and Sensor Mode, GEL, dynamic display operation data and working state. Advanced mpptmaximum power point tracking technology, Float, boost, fast and stable track the Maximum Power Point, tracking accuracy 99.

5% maximizing the energy from solar panels to charge your system. Widely range of maximum power point of pv array, max pv input voltage 75v. In theory, the controller will limited the input power under rated power, no matter how much power of solar panel input, to ensure that the controller does not overload operation under any conditions.3-stage charging bulk, and Equalization and temperature compensation increase your battery life and improve your system's performance.

12v/24v automatic system voltage, 30a max charging current, 12v/390w and 24v/780w pv max input power PV array limited power input function, Synchronous Rectifier Technology, Max 98% transfer efficiency of circuit.5 years warranty. Excellent digital protect function, overload, reverse connection, Overvoltage, Short circuit, Over-discharging, Overcharging, Also professional connector maximum degree avoid damage due to system fault or installation error.
BrandBeleeb #ad
ManufacturerBeleeb #ad

10. SolarEpic


EPEVER MPPT Solar Charge Controller 40A 150V PV Solar Panel Controller Negative Ground W/ MT50 Remote Meter + Temperature Sensor PC Monitoring CableTracer4215BN

SolarEpic #ad - Negative grounding mppt solar charge controller tracer4215bn, the Advanced MPPT Control Algorithm makes this 40 Amp MPPT Controller Tracking Efficiency higher than 99. 5%. A solid state relay is recommended if you are using a Power Inverter.

Rs-485 communication bus interface and standard MODBUS interface available to meet various communication requirements, Temperature Sensor and PC monitoring Cable Attached. This 40 amp mppt solar panel charger works with 600w solar panel on 12v battery system and 1200w on 24V Battery. Work with all lead acid batteries, sealed AGM GEL and Flooded Battery, User mode allows buyer setting their own charging parameters.

Max solar panel 1560w, multiple load mode allow you set the load on/off in different situation. 150v max pv input allow this charge controller handles more Solar Panels Wiring in Series to minimize PV current, 5 x 12V Solar Panel Connecting in Series will be applicable.
BrandSolarEpic #ad
ManufacturerEpsolar #ad
Weight4 Kilograms
Part NumberTracer4215BN-MT50
WarrantyWe offer 2 years limited warranty

Top 10 Peanuts for Squirrels – Pet Food

Top 10 Professional Landscape Fabric – Weed Barrier Fabric