PRO 1 Heater Hose 5/8 Inch Inside Diameter X 6 Feet Length 052615C

#ad
#ad
Thermoid #ad - Temperature resistant from -40 Degrees Fahrenheit to +212 Degrees Fahrenheit. Made by pro 1 in the usa resists weathering to provide long, trouble free service life OEM 6 foot piece of 5/8" id epdm black Rubber Heater Hose Made in the USA. Flexible and can be used for Cars, Trucks, Tractors, or Small Engines.

Nitrile tube construction with 2 Spiral Polyester Reinforcement and PVC/Nitrile Blend Cover. Withstands the abuse of corrosive solutions and additives.

More information about Thermoid #ad

PRO 1 Heater Hose 3/4 Inch Inside Diameter X 6 Feet Length 052615C

#ad
#ad
Thermoid #ad - Flexible and can be used for Cars, Trucks, Tractors, or Small Engines. Nitrile tube construction with 2 Spiral Polyester Reinforcement and PVC/Nitrile Blend Cover. Made by pro 1 in the usa resists weathering to provide long, trouble free service life OEM 6 foot piece of 3/4" id epdm black Rubber Heater Hose Made in the USA.

Withstands the abuse of corrosive solutions and additives. Temperature resistant from -40 Degrees Fahrenheit to +212 Degrees Fahrenheit.

More information about Thermoid #ad


Similar products



PRO 1 Heater Hose 1/2 Inch Inside Diameter X 6 Feet Length 121713 A

#ad
#ad
Thermoid #ad - Made by pro 1 in the usa resists weathering to provide long, trouble free service life OEM 6 foot piece of 3/4" id epdm black Rubber Heater Hose Made in the USA. Withstands the abuse of corrosive solutions and additives. Flexible and can be used for Cars, Trucks, Tractors, or Small Engines. Nitrile tube construction with 2 Spiral Polyester Reinforcement and PVC/Nitrile Blend Cover.

Temperature resistant from -40 Degrees Fahrenheit to +212 Degrees Fahrenheit. Temperature resistant from -40 Degrees Fahrenheit to +212 Degrees Fahrenheit. Withstands the abuse of corrosive solutions and additives. Flexible and can be used for Cars, Trucks, Tractors, or Small Engines. Nitrile tube construction with 2 Spiral Polyester Reinforcement and PVC/Nitrile Blend Cover.

PRO 1 Heater Hose 1/2 Inch Inside Diameter X 6 Feet Length 121713 A #ad - 6 foot piece of 1/2" id epdm black rubber Heater Hose Made in the USA by Thermoid.

More information about Thermoid #ad


Similar products



7/8" Pack of 10 - Precision Brand M6S Micro Seal, Miniature All Stainless Worm Gear Hose Clamp, 5/16"

#ad
#ad
Precision Brand Products, Inc. 33040 #ad - Hose clamps are suitable for a large number of industries, electronic, and commonly used in industrial, and automotive applications. Precision brand products manufactures products such as hose clamps, shims, threaded rods, keystock, punch and die sets, and wire. Temperature resistant from -40 Degrees Fahrenheit to +212 Degrees Fahrenheit.

They come in a variety of designs and distribute uniform pressure over the circumference of hoses to bind them to fittings. Withstands the abuse of corrosive solutions and additives. The company, il, founded in 1946 and headquartered in Downers Grove, meets International Organization for Standardization ISO standard 9001.

7/8" Pack of 10 - Precision Brand M6S Micro Seal, Miniature All Stainless Worm Gear Hose Clamp, 5/16" #ad - The precision brand m-s series micro seal stainless steel miniature worm gear clamp has a stainless steel band, and screw, housing, and are a miniature size for fitting small hoses in confined spaces. The 5/16" band and housing are made of stainless steel that conforms to the Society of Automotive Engineers SAE 300 series standard and provides resistance to corrosion.

Flexible and can be used for Cars, Trucks, Tractors, or Small Engines. Nitrile tube construction with 2 Spiral Polyester Reinforcement and PVC/Nitrile Blend Cover. Band width of 5/16" better fits small hoses than larger widths. Miniature size for small hoses installed in confined spaces.

More information about Precision Brand Products, Inc. 33040 #ad


Similar products



Anderson Metals Brass Hose Fitting, Union, 5/8" x 5/8" Barb

#ad
#ad
Anderson Metals 57014-10 #ad - 6 foot piece of 1/2" id epdm black rubber Heater Hose Made in the USA by Thermoid. Miniature size for small hoses installed in confined spaces. Flexible and can be used for Cars, Tractors, Trucks, or Small Engines. Nitrile tube construction with 2 Spiral Polyester Reinforcement and PVC/Nitrile Blend Cover.

This coupling has barbed connections on both ends for connecting two hoses. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. This anderson metals union coupling is made of brass and connects two hoses with the same diameter in a straight run.

Anderson Metals Brass Hose Fitting, Union, 5/8" x 5/8" Barb #ad - Temperature resistant from -40 Degrees Fahrenheit to +212 Degrees Fahrenheit. Barbed fitting for a tight seal on hoses. They are made of brass, stainless steel, and other materials that resist corrosion, galvanized steel, pressure, and wear. Series 300 stainless steel band helps provide resistance to corrosion in marine environments.

Stainless steel screw resists corrosion. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S.

More information about Anderson Metals 57014-10 #ad


Similar products



Dorman Help! 47062 Heater Hose Elbow 5/8""""

#ad
#ad
Dorman - HELP 47062 #ad - Flexible and can be used for Cars, Tractors, Trucks, or Small Engines. Nitrile tube construction with 2 Spiral Polyester Reinforcement and PVC/Nitrile Blend Cover. Connects to a hose on both ends. 6 foot piece of 3/4" id epdm black Rubber Heater Hose Made in the USA. Series 300 stainless steel band helps provide resistance to corrosion in marine environments.

And its territories. Heater hose elbow, 5/8" 47062. Union coupling for connecting two hoses with the same diameter in a straight run. Band width of 5/16" better fits small hoses than larger widths. Our hvac heater hose Connector resists brittleness, cracking, and leaking. Miniature size for small hoses installed in confined spaces.

Dorman Help! 47062 Heater Hose Elbow 5/8"""" #ad - Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. Temperature resistant from -40 Degrees Fahrenheit to +212 Degrees Fahrenheit. Made of high-quality material, it weathers extreme temperatures from the engines coolant.

More information about Dorman - HELP 47062 #ad


Similar products



EDGE INDUSTRIAL 3/4" X 5/8" Hose ID Brass Barb Reducer SPLICER Fitting Fuel / AIR / Water / Oil / Gas / WOG Qty 1

#ad
#ad
EDGE INDUSTRIAL #ad - Stainless steel screw resists corrosion. 3/4" x 5/8" brass barb Splicer Reducer Fitting. Withstands the abuse of corrosive solutions and additives. Series 300 stainless steel band helps provide resistance to corrosion in marine environments. Union coupling for connecting two hoses with the same diameter in a straight run.

Not for potable water. 6 foot piece of 1/2" id epdm black rubber Heater Hose Made in the USA by Thermoid. Connects to a hose on both ends. Band width of 5/16" better fits small hoses than larger widths. Please review our attached npt sizing chart to cross reference NPT thread size to linear inches 6 foot piece of 3/4" id epdm black Rubber Heater Hose Made in the USA.

EDGE INDUSTRIAL 3/4" X 5/8" Hose ID Brass Barb Reducer SPLICER Fitting Fuel / AIR / Water / Oil / Gas / WOG Qty 1 #ad - Not for use with potable water. Miniature size for small hoses installed in confined spaces. Not deemed lead free. 150 psi maximum working pressure. Not deemed lead free. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Backed by edGE Industrial full manufacturers warranty.

150 psi maximum working pressure.

More information about EDGE INDUSTRIAL #ad


Similar products



Spectre Performance 5953 5/8" Heater Hose Fitting

#ad
#ad
Spectre SPE-5953 #ad - Not deemed lead free. Band width of 5/16" better fits small hoses than larger widths. Triple chrome plated. Withstands the abuse of corrosive solutions and additives. Miniature size for small hoses installed in confined spaces. 1-3/4 inches long. 6 foot piece of 1/2" id epdm black rubber Heater Hose Made in the USA by Thermoid.

150 psi maximum working pressure. Flexible and can be used for Cars, Tractors, Trucks, or Small Engines. Nitrile tube construction with 2 Spiral Polyester Reinforcement and PVC/Nitrile Blend Cover. Temperature resistant from -40 Degrees Fahrenheit to +212 Degrees Fahrenheit. Flexible and can be used for Cars, Trucks, Tractors, or Small Engines.

Spectre Performance 5953 5/8" Heater Hose Fitting #ad - Nitrile tube construction with 2 Spiral Polyester Reinforcement and PVC/Nitrile Blend Cover. Stainless steel screw resists corrosion. Spectre’s heater hose fitting has a 1/2 inch NPT thread, a 5/8 inch barbed hose fitting and an overall length of 1-3/4 inches long. Series 300 stainless steel band helps provide resistance to corrosion in marine environments.

3/4" x 5/8" brass barb Splicer Reducer Fitting. Backed by edGE Industrial full manufacturers warranty.

More information about Spectre SPE-5953 #ad


Similar products



LOKMAN Hose Clamp, 60 Pieces Stainless Steel Adjustable 6-38mm Range Worm Gear Hose Clamp, Fuel Line Clamp for Plumbing, Automotive and Mechanical Applications

#ad
#ad
LOKMAN #ad - Flexible and can be used for Cars, Tractors, Trucks, or Small Engines. Nitrile tube construction with 2 Spiral Polyester Reinforcement and PVC/Nitrile Blend Cover. Flexible and can be used for Cars, Tractors, Trucks, or Small Engines. Nitrile tube construction with 2 Spiral Polyester Reinforcement and PVC/Nitrile Blend Cover.

Salt resistant, anti rust, oil-proof. Packed in a durable handy case. 6 foot piece of 1/2" id epdm black rubber Heater Hose Made in the USA by Thermoid. They provide a great secure in hoses, tube, cable, pipe, fuel lines etc even in water salt circumstance. Backed by edGE Industrial full manufacturers warranty.

LOKMAN Hose Clamp, 60 Pieces Stainless Steel Adjustable 6-38mm Range Worm Gear Hose Clamp, Fuel Line Clamp for Plumbing, Automotive and Mechanical Applications #ad - Miniature size for small hoses installed in confined spaces. Not for potable water. Perfect to apply in automotive, cable, boat/marine, household etc. Series 300 stainless steel band helps provide resistance to corrosion in marine environments. Union coupling for connecting two hoses with the same diameter in a straight run.

High quality- the whole hose clamp including the band, waterproof, housing and screw are all made of premium heavy duty stainless steel material. 40° to 160° temperature Rating.

More information about LOKMAN #ad


Similar products



EDGE INDUSTRIAL 5/8" X 1/2" Hose ID Brass Barb Reducer SPLICER Fitting Fuel / AIR / Water / Oil / Gas / WOG Qty 1

#ad
#ad
EDGE INDUSTRIAL #ad - And its territories. Heater hose elbow, 5/8" 47062. Withstands the abuse of corrosive solutions and additives. High quality- the whole hose clamp including the band, waterproof, housing and screw are all made of premium heavy duty stainless steel material. Perfect to apply in automotive, boat/marine, cable, household etc.

Both indoor or outdoor. Environmental friendly- it can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long. Package: 60pcs stainless steel hose clamps assortment kit with 5 sizes. Not for use with potable water. Temperature resistant from -40 Degrees Fahrenheit to +212 Degrees Fahrenheit.

EDGE INDUSTRIAL 5/8" X 1/2" Hose ID Brass Barb Reducer SPLICER Fitting Fuel / AIR / Water / Oil / Gas / WOG Qty 1 #ad - Fit hose diameter: 6-12mm, 22-32mm, 16-25mm, 13-19mm, 10-16mm, 19-29mm, 25-38mm.5/8" x 1/2" brass barb Splicer Reducer Fitting. 150 psi maximum working pressure. Packed in a durable handy case. 5/8" x 1/2" brass barb Splicer Reducer Fitting. Please review our attached npt sizing chart to cross reference NPT thread size to linear inches 6 foot piece of 3/4" id epdm black Rubber Heater Hose Made in the USA.

Handy and fulfill your multi needs.

More information about EDGE INDUSTRIAL #ad


Similar products



Metalwork PEX Brass Full Port Shut Off Ball Valve, 5/8" Barb, 1 Pcs

#ad
#ad
Metalwork #ad - Series 300 stainless steel band helps provide resistance to corrosion in marine environments. Miniature size for small hoses installed in confined spaces. The construction of heavy duty forged brass valve pressure is rated 150 PSI for steam and 600 PSI for water, oil and gas. Backed by edGE Industrial full manufacturers warranty.

Not deemed lead free. Packed in a durable handy case. 5/8" x 1/2" brass barb Splicer Reducer Fitting. Backed by edGE Industrial full manufacturers warranty. The valve is operated with a chrome plated brass handle covered with a vinyl grip. Both indoor or outdoor. Environmental friendly- it can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long.

Metalwork PEX Brass Full Port Shut Off Ball Valve, 5/8" Barb, 1 Pcs #ad - Package: 60pcs stainless steel hose clamps assortment kit with 5 sizes. Typical uses include domestic hot cold water systems and natural gas. Connects to a hose on both ends. Handy and fulfill your multi needs. Widely used- clamps are used in securing hoses, industrial, tube, shield, pipe, fuel lines etc. Band width of 5/16" better fits small hoses than larger widths.

More information about Metalwork #ad


Similar products

100-Percent Natural Chicken Jerky Dog Treats, 1-Pound – Pet ‘N Shape – Chik ‘N Breast

Connoisseurs Precious Jewelry Cleaner, 8 Fl Oz